3M™ Scotchkote™ Application Gun – 450 ml

Description 3M™ Scotchkote™ Application Gun for 450 ml cartridges. Details 100% solids Excellent adhesion High build, up to 45 mils, in one application Can be applied to a substrate as cold as 41°F/5°C Resistant to damage from acids and bases in pH range 2-14 Resistant to hydrocarbons such as crude oil, motor oils and gasoline 2A:1B Volumetric Mix Ratio 3M™ Scotchkote™ Liquid Epoxy Coating 323C is a two-part system designed as a patch material for 3M™ Scotchkote™ Fusion-Bonded Epoxy Coating 134. General Application Steps For use as a joint coating, a refurbishing coating, or as pipe coating. 1. Remove oil, grease, and loosely adhering deposits. 2. Verify the air temperature is 5°F/3°C above the dew point. 3. Abrasive blast clean surface to NACE #2/SSPC-SP10, ISO 8501:1 SA-2 1/2 near white metal. 4. With air hose, clean blasted surface of any abraded debris then verify anchor profile is 2-4 mils/50-100 microns. 5. With the substrate between 41°F/5°C and 200°F/93°C dew point 5°F/3°C below air temperature, apply Scotchkote™ Liquid Epoxy Coating 323 at minimum film of 25 mil/ 625 microns. 6. Apply Scotchkote™ 323 as soon as possible after blasting but no more than 4 hours. 7. Allow to cure per time & temperature chart below. 8. Visually or electrically inspect the coating for defects. 9. Repair all defects using Scotchkote™323 as repair material. Mix nozzles sold separately. For use with the 3M™ Scotchkote™ Liquid Epoxy Coating Manual 450 ml. Applicator OR 3M™ Scotchkote™ Liquid Epoxy Coating Spray System HSS 450 ml. Applicator. This Scotchkote™ application gun is for the 450ML Cartridge. If you are looking for a different size, check the products below. 3M™ Scotchkote™ 323 Liquid Epoxy Coating 50ml Cartridge Applicator 3M™ Scotchkote™ HSS Cartridge 450ml Spray Gun